How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add a second key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then a new key as well as transponder must be purchased and programmed to the car.
It is recommended to rotate your keys in order that one doesn't wear out more quickly than the other. This will help keep your keys in good condition.
Replacement Case
The new key fobs aren't like the old Saab keys. They are equipped with electronics which make it hard to copy. This has made car theft much more difficult than it was twenty years ago. However, it also has made the replacement of lost keys an incredibly expensive task.
Saab 9-3 owners must have two keys that work. It's expensive to replace a lost key, as it requires replacing the CIM module, and changing the locking cylinders. Dealers typically charge between $100 and $200 to do this.
There are ways to reduce these high costs. Some parts providers will find the code from an extra key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at less than the dealer's cost. The key, however, must be identical to the original in order to function in your vehicle.
Follow these steps to replace the case. You'll require an flathead screwdriver and patience. With the screwdriver, slowly break the plastic and separate the emergency key from the case. Once you have the case open, remove the electronics and place them inside your new case. Put the correct key and badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a budget part that can be easily and quickly replaced. Cyclone's YouTube video Cyd demonstrates how you can replace the battery for the remote fob in just four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to find the button that opens the backup key on the fob. This is usually located near the Saab logo on the back of the fob. Next, use a flathead screwdriver into the small hole in this button. This should be enough to open the fob case to allow you to change the battery.
After you have installed the CR1632 batteries, you can rebuild the remote key fob. Then, you can program it into your car. The entire process should not take more than an hour, if not less. saab 93 key replacement is a simple procedure that doesn't require special tools.
If you lose a key the procedure will be somewhat more complex, but it can still be accomplished. The dealer has to verify the VIN of the car, and then order a new key blade and TWICE module that has the exact unique code. The dealer will then have to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob contains a battery that is used to lock and unlock your vehicle. Batteries have a limited lifespan and eventually die. This is a common problem that happens with all cars and the good thing is that you can replace the batteries in most key fobs without replacing the entire case. You can purchase replacement fobs from Amazon that come with all the electronic components already in place, so you'll simply open the case and replace those batteries that are old. It is important to keep in mind that you'll need remove the emergency key first, and you can do this by putting the small screwdriver flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it much easier to remove.
If you're looking to replace your keys, make sure you have a spare on hand. This can save you a lot of money. If you have a spare you can ask the dealer cut an additional key and program it to the car, which is cheaper than replacing the whole key fob.
If you don't have a spare one, you can add another key to your car, but this requires a lot research and effort. It costs a few hundred dollars to add a second car key. The computer in the car also needs to be programmed. This can be done by a professional, however it's a costly option for the majority of owners.
Replacement Ignition
In contrast to the earlier Saab cars, the modern SAAB 9-3 models use an extremely sophisticated alarm system that is built on a key code. If you lose your sole key, it can be costly to get another one, as the car has to have a special computer added and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.
If you've lost your only working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you a premium price for it. We can reprogramme the existing EEPROM of your car's computer so that it is ready to accept an additional key. This will save you more than 50% off the price you'd have to pay a dealer.
If you've owned a SAAB 9-3 for many years, you know that the ignition keys aren't very durable. They can get extremely sticky, and the buttons can be removed from them at times, so you should consider purchasing a new one if yours isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it seems and can be done fairly quickly using the proper tools.